Crystal ceiling Kit

Fibre Optic Lighting Crystal Ceiling Kits

These Fibre optic lighting crystal fittings are made with the purest and most finely cut crystal parts and achieve a regular and radiant reflected pattern onto the ceiling or surface in which they are installed. There are 2 different crystal cuts for two different patterns. These fibre optic crystal ceiling kits are typically installed in bathrooms, saunas and steam rooms, but are suitable for installation in any room in the home, promoting a luxury feel and therapeutic benefits. The Fibre optic ceiling lighting kit comes as standard with colour change ability and is supplied with our standard colourwheel. We recommend to many of our customers the interchanging of a twinkle wheel for the colourwheel - this creates an enchanting and soothing effect. The flanges are available in chrome, gold colour or stainless steel . If you are installing the crystals in an insulated ceiling, such as a sauna ceiling, mounting sleeves are available. Please note that a larger drill bit is required for fitting these.

Fibre Optic Lights | Crystal ceiling lighting kit UK

Crystal Ceiling Kit (CCK20)
This Crystal ceiling kit comprises: 100W tungsten halogen lightsource with 2 plugs. One powers the lamp whilst the other switches the colourwheel on or off. Dimensions: (L)286mm x (W)155mm x (H)119mm. Cutout sizes: 10mm for plasterboard or 11mm for wood. If mounting sleeves are used the cutout size is 12mm.
Crystal Ceiling Kit (CCK20) Gold Fitting Chrome Fitting Complete Extended Sleeve kit (+ Ł6.95) Ł Select Crystal flange finish above by ticking box. Extended Sleeve kit optional. These crystal fittings are made with the purest and most finely cut crystal parts and achieve a regular and radiant reflected pattern onto the ceiling or surface in which they are installed. There are 2 different crystal cuts for two different patterns. For more information call 0151 334 0222	Picture above is just one example of a fibre optic crystal ceiling kit.

Crystal Ceiling Kit Contents (CCK20)
100W tungsten halogen lightsource with 2 plugs. One powers the lamp whilst the other switches the colourwheel on or off. Dimensions: (L)286mm x (W)155mm x (H)119mm	Fibre optic harness with 20 tails. Lengths vary between 1.5 metres and 2.0 metres. 10 Tails @ 1.5m 10 Tails @ 2.0m	A six segment colourwheel is supplied. This is pre-installed in the lightsource and can be left to rotate continuously or can be stopped on any colour to give static light output.	20 crystal fittings with either chrome or gold finished flanges. Two sizes are supplied to give variation to the sparkle effect: 14 x 9mm & 6 x 14mm.	For use when crystals are to be installed into an insulated ceiling, mounting sleeves make it easier to run the fibre through the insulation.

Crystal Ceiling Kit (CCK20XL)
This Crystal ceiling kit comprises: 100W tungsten halogen lightsource with 2 plugs. One powers the lamp whilst the other switches the colourwheel on or off. Dimensions: (L)286mm x (W)155mm x (H)119mm Cutout sizes: 10mm for plasterboard or 11mm for wood. If mounting sleeves are used the cutout size is 12mm.
Crystal Ceiling Kit (CCK20XL) CR1 Gold Fitting CR2 Chrome Fitting CR3 Complete Extended Sleeve kit (+ Ł6.95) Ł Select Crystal flange finish above by ticking box. Extended Sleeve kit optional. These crystal fittings are made with the purest and most finely cut crystal parts and achieve a regular and radiant reflected pattern onto the ceiling or surface in which they are installed. There are 2 different crystal cuts for two different patterns. For more information call 0151 334 0222	Picture above is just one example of a fibre optic crystal ceiling kit.

Crystal Ceiling Kit Contents (CCK20XL)
100W tungsten halogen lightsource with 2 plugs. One powers the lamp whilst the other switches the colourwheel on or off. Dimensions: (L)286mm x (W)155mm x (H)119mm	Fibre optic harness with 20 tails. Lengths vary between 1.5 metres and 2.0 metres. 10 Tails @ 3.0m 10 Tails @ 4.0m	A six segment colourwheel is supplied. This is pre-installed in the lightsource and can be left to rotate continuously or can be stopped on any colour to give static light output.	20 crystal fittings with either chrome or gold finished flanges. Two sizes are supplied to give variation to the sparkle effect: 14 x 9mm & 6 x 14mm.	For use when crystals are to be installed into an insulated ceiling, mounting sleeves make it easier to run the fibre through the insulation.

Crystal Ceiling Kit (CCK30)
This Crystal ceiling kit comprises: 100W tungsten halogen lightsource with 2 plugs. One powers the lamp whilst the other switches the colourwheel on or off. Dimensions: (L)286mm x (W)155mm x (H)119mm Cutout sizes: 10mm for plasterboard or 11mm for wood. If mounting sleeves are used the cutout size is 12mm.
Crystal Ceiling Kit (CCK30) CR1 Gold Fitting CR2 Chrome Fitting CR3 Complete Extended Sleeve kit (+ Ł6.95) Ł Select Crystal flange finish above by ticking box. Extended Sleeve kit optional. These crystal fittings are made with the purest and most finely cut crystal parts and achieve a regular and radiant reflected pattern onto the ceiling or surface in which they are installed. There are 2 different crystal cuts for two different patterns. For more information call 0151 334 0222	Picture above is just one example of a fibre optic crystal ceiling kit.

Crystal Ceiling Kit Contents (CCK30)
100W tungsten halogen lightsource with 2 plugs. One powers the lamp whilst the other switches the colourwheel on or off. Dimensions: (L)286mm x (W)155mm x (H)119mm	Fibre optic harness with 30 tails. Lengths vary between 2.5 metres and 4.5 metres. 10 Tails @ 2.5m 10 Tails @ 3.5m 10 Tails @ 4.5m	A six segment colourwheel is supplied. This is pre-installed in the lightsource and can be left to rotate continuously or can be stopped on any colour to give static light output.	30 crystal fittings with either chrome or gold finished flanges. Two sizes are supplied to give variation to the sparkle effect: 21 x 9mm & 9 x 14mm.	For use when crystals are to be installed into an insulated ceiling, mounting sleeves make it easier to run the fibre through the insulation.

Crystal Ceiling Kit (CCK70)
This Crystal ceiling kit comprises: 100W tungsten halogen lightsource with 2 plugs. One powers the lamp whilst the other switches the colourwheel on or off. Dimensions: (L)286mm x (W)155mm x (H)119mm Cutout sizes: 10mm for plasterboard or 11mm for wood. If mounting sleeves are used the cutout size is 12mm.
Crystal Ceiling Kit (CCK70) CR1 Gold Fitting CR2 Chrome Fitting CR3 Complete Extended Sleeve kit (+ Ł6.95) Ł Select Crystal flange finish above by ticking box. Extended Sleeve kit optional. These crystal fittings are made with the purest and most finely cut crystal parts and achieve a regular and radiant reflected pattern onto the ceiling or surface in which they are installed. There are 2 different crystal cuts for two different patterns. For more information call 0151 334 0222	Picture above is just one example of a fibre optic crystal ceiling kit.

Crystal Ceiling Kit Contents (CCK70)
100W tungsten halogen lightsource with 2 plugs. One powers the lamp whilst the other switches the colourwheel on or off. Dimensions: (L)286mm x (W)155mm x (H)119mm	Fibre optic harness with 70 tails. Lengths vary between 2.5 metres and 6.5 metres. 20 Tails @ 2.5m 20 Tails @ 4.5m 30 Tails @ 6.5m	A six segment colourwheel is supplied. This is pre-installed in the lightsource and can be left to rotate continuously or can be stopped on any colour to give static light output.	70 crystal fittings with either chrome or gold finished flanges. Two sizes are supplied to give variation to the sparkle effect: 21 x 9mm & 9 x 14mm.	For use when crystals are to be installed into an insulated ceiling, mounting sleeves make it easier to run the fibre through the insulation.

Fibre Optic Lights | Crystal ceiling lighting kit UK

Crystal Fittings - 6 x CR1(14mm) & 14 CR2(9mm)
Size of cutout required for fitting: 10mm
Fittings available in chrome or gold effect.

Back to main fibre optic lights page just click here

Last modified: 02-08-11

Electronic mail.
General Information: sales@jacksons-camping.co.uk
Sales: sales@jacksons-camping.co.uk
Webmaster: john.jackson2@btconnect.com