We have a new & improved site! It's easier to navigate just click here
Home - Fibre Optic Lights - Paver Kits

Fibre Optic Lights Decking Flooring & Paver Kits UK

Fibre optic light decking floor and paver kits come as a large, medium or small. The light source in all fibre optic paver kits contains a 4 colour wheel with a separate feed for single colour allowing you to change the mood and ambience of your garden at the flick of a switch.

Star Deck Kits

Fibre optic deck lighting star kit

These amazing fibre optic star deck lighting kits comprise of inconspicuous miniature acrylic heads that are almost invisible when not in use. Come the evening you can switch on these deck lighting kits and watch heads turn.
These paver and deck lighting kits are also ideal for creating magical effects in the floor of children's bedrooms or play areas. The effect from these deck lighting kits is truly stunning, especially when used with a twinkle effect.

These paver lighting kits are typically installed in: wooden floors, wooden decking, paving, pathways, interior and exterior steps and stages. Tails of these deck lighting kits can be installed in cement, between paving slabs, stones or even in the grout between tiles.

These deck lighting kits also come supplied as standard with a water resistant enclosure to allow for the light source to be sited outdoors - typically underneath your decking.

Fibre Optic Star Deck Kits

white fibre optic light strands in paving stonepatio lighting

fibre option decking lights used in staircaseflower bed wall lights

 

 

Small Star Deck Kit

The small kit comprises:

35W tungsten halogen lightsource with 1 plug. One powers the lamp whilst the other switches the colourwheel on or off.

  • Dimensions: (L)286mm x (W)155mm x (H)119mm

Electrical Requirements:

  • 1 x 240V household electrical supplies.
  • Cutout sizes: 3mm cutout required for all fitting options.
  • Please choose you desired fitting type from the options below.

Standard small kit with 55 tails & lenses

For more information call 0151 334 0222

Small Star Deck Kit Contents

35 Watt lightsource with single plug
weatherproof enclosure
fibre optic tails
fibre optic 4 segment colour wheel
acrylic lenses

35W tungsten halogen lightsource with 1 plug. This lightsource outputs colour changing light continuously. The colourwheel can be removed by the end user to allow static white light output.

This kit is also supplied with a weatherproof enclosure to allow the light source to be sited outdoors, typically under decking.
Dimensions: (L)300mm x (W)200mm x (H)120mm

Fibre optic harness with 55 tails. Lengths vary between 1.0 metres and 3.0 metres.

A four segment colourwheel is supplied. This is pre-installed in the lightsource and rotates continuously or it can be removed to give static white light output.

55 flush fitting acrylic lenses are supplied.

 

Small Star Deck Kit + 55 Contents
The small deck kit +55 comprises:

1 x 35W tungsten halogen light source which must be kept in a waterproof location or housed in the supplied IP enclosure (This item now comes with waterproof enclosure).

Light source requires 1 x 240V supply and comes fitted with a household plug.
1 bulb which lasts up to 3000 hours.

Small + 55 Star deck kit (110 Tails & lenses total)

For more information call 0151 334 0222

fibre strands

35W tungsten halogen lightsource with 1 plug. This lightsource outputs colour changing light continuously. The colourwheel can be removed by the end user to allow static white light output

This kit is also supplied with a weatherproof enclosure to allow the light source to be sited outdoors, typically under decking.
Dimensions: (L)300mm x (W)200mm x (H)120mm

Fibre optic harness with 110 tails. Lengths vary between 1.0 metres and 3.0 metres.

A four segment colourwheel is supplied. This is pre-installed in the lightsource and rotates continuously or it can be removed to give static white light output.

110 flush fitting acrylic lenses are supplied.

 

Large Star Deck Kit Contents

The kit comprises:

Large fibre optic decking kit. Supplied with higher output 75W lightsource, weatherproof enclosure, 110 acrylic end fittings and 110 fibre optic tails with lengths ranging from 1.0 metres to 5.0 metres.

Electrical Requirements: 2 x 240V household electrical supplies.

Cut out sizes: 3mm cut out required for paver fittings.

Large Star deck kit with 110 Tails & lenses

For more information call 0151 334 0222

75W tungsten halogen lightsource with 2 plug. This lightsource outputs colour changing light continuously. The colourwheel can be removed by the end user to allow static white light output.

This kit is also supplied with a weatherproof enclosure to allow the light source to be sited outdoors, typically under decking.
Dimensions: (L)400mm x (W)300mm x (H)220mm

Fibre optic harness with 110 tails. Lengths vary between 1.0 metres and 5.0 metres.

A six segment colourwheel is supplied. This is pre-installed in the lightsource and rotates continuously or it can be removed to give static white light output.

110 flush fitting acrylic lenses are supplied.

 

Large Star Deck Kit Contents

The kit comprises:

Extra Large fibre optic decking kit. Supplied with higher output 75W lightsource, weatherproof enclosure, 220 acrylic end fittings and 220 fibre optic tails with lengths ranging from 1.0 metres to 5.0 metres.

Electrical Requirements: 2 x 240V household electrical supplies.

Cut out sizes: 3mm cut out required for paver fittings.

 

Large + 110 Star deck kit (220 Tails and lenses total)

For more information call 0151 334 0222

75W dual plug lightsource
weatherproof enclosure
fibre optic harness
6 colour wheel
220 acrylic lenses

75W tungsten halogen lightsource with 2 plug. This lightsource outputs colour changing light continuously. The colourwheel can be removed by the end user to allow static white light output.

This kit is also supplied with a weatherproof enclosure to allow the light source to be sited outdoors, typically under decking.
Dimensions: (L)400mm x (W)300mm x (H)220mm

Fibre optic harness with 220 tails. Lengths vary between 1.0 metres and 5.0 metres.

A six segment colourwheel is supplied. This is pre-installed in the lightsource and rotates continuously or it can be removed to give static white light output

 

220 flush fitting acrylic lenses are supplied.