To purchase go to our new & easy to navigate site click here

Rule Pumps

 

In-Line Pumps

These in-line pumps are suitable for marine or camping use. They pump 12.7 litres to 31.7 litres per minute running off a 12v power supply. With a small compact design these pumps are ideal for when space is limited.

Rule In-line Water Pump il200
Rule In-line Water Pump il200 Plus

The Rule In Line water pump il200 is for fresh or salt water

Features:

  • Suitable for fresh or salt water, This is NOT suitable for Diesel
  • Water transfer, deck shower, or deck wash
  • Water Systems to 60 ºC
  • Intermittent rating of 20 minutes. Should not be run dry for long periods

Specifications:
Output up to: 12.7 litres/minute at up to 1bar (2.8 gallons/minute at 14psi)
Connections: 12.7mm Hose
Dimensions: (L x Diameter) 130 x 36 mm
Max. Current: 2.8 A
Weight: 206 g

Technical Data Sheet

This is the il200 plus which is the same as the standard model but can handle pumping Diesel

                                                 
  • Suitable for diesel, fresh and salt water
  • Quick diesel transfer with no spillage
  • Bait tank aeration, diesel transfer, water transfer.
  • Water Systems to 80 ºC
  • Continuous rating but should not be run dry for long periods

Specifications:
Output up to: 12.7 litres/minute at up to .75bar (2.8 gallons/minute at 11psi)
Connections: 12.7mm Hose
Dimensions: (L x D) 142 x 38 mm
Max. Current: 2.5 A
Weight: 260 g

Technical Data Sheet

 

Rule In-line Water Pump il280 Plus
Rule In-line Water Pump il500 Plus

Rule In Line il280 water pump can be used for water systems up to 80 ºC

Features:

  • Suitable for diesel, fresh and salt water
  • Quick diesel transfer with no spillage
  • Water transfer, deck shower, or deck wash
  • Water Systems to 80 ºC
  • Continuous rating but should not be run dry for long periods

Specifications:
Output up to: 18 litres/minute at up to 1bar (4 gallons/minute at 14psi)
Connections: 12.7mm Hose
Dimensions: (L x D) 165 x 38 mm
Max. Current: 4.5 A
Weight: 470 g

Technical Data Sheet

water pump in line rule il500 plus

Features:

  • Suitable for diesel, fresh and salt water
  • Quick diesel transfer with no spillage
  • Water transfer, deck shower, or deck wash
  • Continuous rating but should not be run dry for long periods

Specifications:
Output up to: 31.8 litres/minute at up to 1bar (7 gallons/minute at 14psi)
Connections: 19mm Hose
Dimensions: 165mm long, 38mm diameter
Max. Current: 6 A
Weight: 560 g

Technical Data Sheet

 

Rule-A-Matic Switches

Rule super switch for bilge pumps

Now backed by a 5 year warranty, the non-mercury Super Switch is designed for the toughest applications. Design includes marine grade 14 gauge “blocked wire”, larger float for increased buoyancy, removable base for easy servicing and a snap switch design capable of handling pumps drawing up to 20 Amps. This Rule super Switch is NOT suitable for pumps less than 2000 GPH.

Rule-A-Matic float switch

Year after year, the Rule-A-Matic has been the switch of choice for boaters the world over. Our latest design now includes a removable base for easy cleaning and servicing, a mercury free snap switch tested to over one million cycles and marine grade “blocked” wire. Designed for pumps drawing up to 14 Amps. Model 35A and 35FA now includes a 2 year warranty. This Rule A Matic switch is only suitable for pumps up to 2000 GPH.

Rule-A-Matic Plus integrated float switch

Sleek and Robust, the Rule-A-Matic Plus float switch has a strong, fully integrated, impact resistant cover, which protects against debris and jamming. 14 gauge highly abrasive resistant marine grade wire, and a built-in test feature. Designed for pumps drawing up to 20 Amps Model 40A and 40FA. The Rule A Matic Switch now includes a 2 year warranty.

 

Rule 360 GPH Bilge Pump
Rule 500 GPH Bilge Pump

360GPH rule bilge pump

This Rule 360 pump is designed for smaller boats, pumps 360 gallons per hour. Also Available with a low power switch

  • Totally Submersible
  • Ignition Protected, to all existing safety standards BIA, NMMA, ISO and EC
  • Water-cooled for longer life
  • Exclusive rule® moisture tight seals
  • Snap-lock Base
  • Silent and vibration free
  • No burn out if run dry

Specification:

Height: 89mm
Width: 60mm
Weight: 225grams
Hose diameter: 19mm
Current: 2.1A

Rule 360

Rule 360 With low Power Switch

Bilge pump 500GPH Rule

The Rule 500 bilge pump features a Compact design for easy installation. can be used as a livewell/baitwell recalculating pump. Also Available as a automatic bilge pump.

  • Totally Submersible
  • Ignition Protected, to all existing safety standards BIA, NMMA, ISO and EC
  • Water-cooled for longer life
  • Exclusive rule® moisture tight seals
  • Snap-lock Base
  • Silent and vibration free
  • No burn out if run dry

Specification:

Standard:
Height: 89mm
Width: 60mm
Weight: 225grams
Hose diameter: 19mm
Current: 2.5A

Automatic:
Height: 102mm
Width: 61mm
Weight: 311grams
Hose diameter: 18mm
Current: 1.9A

Rule 500

Rule 500 Automatic

 

Rule 800 GPH Bilge Pump
Rule 1000 GPH Bilge Pump

Rule 800 GPH Bilge Pump

The Rule 800 bilge pump is compact pump for smaller vessels. Made with a tough plastic body and a low amp draw to conserve battery. The Rule 800 is available as a round pump that is manual or automatic

  • Totally Submersible
  • Ignition Protected, to all existing safety standards BIA, NMMA, ISO and EC
  • Water-cooled for longer life
  • Exclusive rule® moisture tight seals
  • Snap-lock Base
  • Silent and vibration free
  • No burn out if run dry

Square

Height: 100mm
Width: 74mm
Depth: 82mm
Weight: 397g
Hose diameter: 19mm
Fuse: 5.0A

Round

Height: 95mm
Width: 60mm
Depth: 82mm
Weight: 397g
Hose diameter: 19mm
Fuse: 5.0A

Automatic Round

Height: 108mm
Width: 60mm
Depth: 82mm
Weight: 410g
Hose diameter: 19mm
Fuse: 5.0A

Rule 1000 GPH Marine Bilge Pump

The Rule 1000 bilge pump is an upgraded version of the time tested rule 800. The Rule 1000 is designed for small boat with deep "V" hull and applications

  • Totally Submersible
  • Ignition Protected, to all existing safety standards BIA, NMMA, ISO and EC
  • Water-cooled for longer life
  • Exclusive rule® moisture tight seals
  • Snap-lock Base
  • Silent and vibration free
  • No burn out if run dry

Specification:

Height: 102mm
Width: 64mm
Weight: 396grams
Hose diameter: 19mm
Current: 4.0A

 

 

Rule 1500GPH 12v Bilge Pump
Rule 2000 GPH Bilge Pump

12 volt rule 1500GPH Bilge Pump

This Rule 1500 bilge pump has high pumping capacity and reliability at a lower cost. The Rule 1500 offers more pumping capacity and more exclusive design features than any comparable competitive pump.

  • Totally Submersible
  • Ignition Protected, to all existing safety standards BIA, NMMA, ISO and EC
  • Water-cooled for longer life
  • Exclusive rule® moisture tight seals
  • Snap-lock Base
  • Silent and vibration free
  • No burn out if run dry

Specification:
Height: 152mm
Width: 114mm
Weight: 1219 grams
Hose diameter: 30mm
Current: 2.1A
Available in both 12v and 24v

Rule 1500 (12v)

Rule 1500 (24v)

Bilge Pump Rule 2000 GPH

The Rule 2000 engineered to commercial standards. The Rule 2000 bilge pump is the best selling high capacity submersible bilge pump in the world.

  • Totally Submersible
  • Ignition Protected, to all existing safety standards BIA, NMMA, ISO and EC
  • Water-cooled for longer life
  • Exclusive rule® moisture tight seals
  • Snap-lock Base
  • Silent and vibration free
  • No burn out if run dry

Specification:
Height: 152mm
Width: 108mm
Weight: 1332 grams
Hose diameter: 28mm
Current: 2.1A
Available in both 12v and 24v

Rule 2000 (12v)

Rule 2000 (24v)

 

Rule 3700 GPH Bilge Pump

Rule 3700 GPH Bilge Pump

The Rule 3700 bilge pump heavy duty construction for both commercial and pleasure boat use, known for trouble free operation and reliability.

  • Totally Submersible
  • Ignition Protected, to all existing safety standards BIA, NMMA, ISO and EC
  • Water-cooled for longer life
  • Exclusive rule® moisture tight seals
  • Snap-lock Base
  • Silent and vibration free
  • No burn out if run dry

Specification:
Height: 84mm
Width: 124mm
Weight: 1332 grams
Hose diameter: 30mm
Current: 2.1A
Available in both 12v and 24v

Rule 3700 (12v)

Rule 3700 (24v)