 |
Heating Elements: Titanium, High MgO Compaction |
 |
Flow Tubes: BS 316 Stainless Steel |
 |
Cladding panels: Aluminium, epoxy powder coated |
 |
Safety Thermal Cut Out: 1x 60°C Safety thermal cut out (auto reset)
per flow tube against over-temperature
1x 60°C Safety thermal cut out (auto reset) against enclosure
over-temperature
1x 55°C Safety thermal cut out (manual Reset) |
 |
Flow Switch: Gold tipped reed switch with titanium fulcrum pin |
 |
Wiring: High Temperature, Silicone sheathed, multi-strand copper
conductors |
 |
Contactor: Cascade wired dual schneider contactors for each element
bank |
 |
Seals: Special formula high temperature polymer |
 |
Water connections: 63mm spigot with adaptor for 2 inch NB |
 |
Working pressure: 4 Barg maximum |
 |
Mounting: Floor or wall mounting |
 |
Standards Compliance: European Electromagnetic Compatibility
directive 89/336/EEC and 93/068/EEC |
 |
Harmonised Standards: EN55014 - EN55104, EN5501, EN5502, CEI801-4, CEI801-2,
CEI801-3, the European low voltage directive 72/23EEC, the harmonised
standard EN60335-2-35 |