Rule Bilge Pumps
UK
Non-Automatic
Rule Bilge Pumps
Traditional
non-automatic bilge pumps are operated by the use of a control switch to sense
water and activate the pump. A selection of control and panel switches available
can be found in the Accessories Section.
Rule-Mate Automated Bilge Pumps
The Rule-Mate bilge pump series of automated bilge pumps feature a pump and a non-mercury
float switch in a single, compact housing. When the float rises, the pump turns
on. There is no on/off cycling and therefore, no power use until the pump comes
on. The pump remains on until the float drops and the pump senses no load
against the impeller. Thoughtfully designed, Rule-MateŽ pumps can be used in
practically all bilge pumping applications.
Rule Automatic Bilge Pumps
Float switches are not required for these fully automatic Rule bilge pumps.
Controlled by computerised operation, the pump will turn on every 2.5 minutes
for about 1 second to sense for water. If water is present, the pump will sense
resistance and continue to run until all water is removed. Power use in the
checking mode is minimal for the peace of mind that this range of Rule bilge pumps offer.
Rule is a global leader in submersible bilge pumps for the recreational and
small commercial boat markets and a leading provider of accessory products such
as ventilation blowers and winches.
Back to Top
Click
here
to return to our
bilge
pumps
